2017年9月29日星期五

SH-M08 CC2541 Bluetooth 4.0 BLE UART Serial Module Compatible with iPhone for Arduino UNO R3 Pro Mini Nano (With 6PIN)

  • BLUETOOH 4.0 BLE : with this module ,you can add Bluetooth features to your arduino and support iOS devices(such as iphone or ipad)
  • Only Slave mode. Compatible with iPhone 4s/5/5s 6/6s and android phones 4.3 or later.We recommend test app is LightBlue for iOS7.0 or later,"Ble Scanner" app for Android phone.
  • Very small size: Maybe SH-M08 is the smallest Bluetooth 4.0 module.You can not only use in your DIY project, and even can be applied to a variety of Bluetooth smart products.
  • TI CC2541 CHIP: Main chip is cc2541F256 manufactured by TI. if you are MCU pro, you can program it by cc-debugger.
  • 1 year warranty:Default rate : 9600, Working voltage 3.3V to 6V ,and You can modify the baud rate and the Bluetooth name via the at command


DataSheet download From Here:   SH-M08 DataSheet 

2 条评论:

  1. The module no longer responds to AT commands (it worked the first time). I can pair with it though and send/receive info through it. What can I do to make it answer again to the AT commands?

    回复删除
    回复
    1. I use an Arduino in order to communicate with AT commands, follow this example: https://ardudron.wordpress.com/2016/04/20/arduino-bluetooth-ble-sh-hc-08/
      Using a TTL-FTDI module didn't work for me. With the arduino works fine, when there's no device connected you can send AT commands and when you connect to a device, the bridge starts immediately.
      By the way, for the device I use LightBlue for Android.

      删除