2017年7月12日星期三

DSD TECH SH-H3 Bluetooth dual mode module for Arduino Compatible with iPhone and Android Phone Replacement of HC-05 HC-06


DataSheet down from here:  SH-H3 DataSheet

Features:

  • Support Bluetooth 4.0 BLE and Bluetooth 2.0 SPP Profile: It is a bluetooth 4.0 dual-mode module with 4 PIN Baseboard. Compatible with Bluetooth Smart (Bluetooth low energy) and Classic Bluetooth 2.0.
  • Bluetooth chip from Realtek, Industrial, high stability
  • Replacement of HC-05 HC-06: If you only need to use the Bluetooth module to transfer data, this module can replace HC-06, HC-05.
  • Led indicate Bluetooth connection status. Work voltage 3.6-6V,Default rate :115200, and You can modify the baud rate and the Bluetooth name via AT command.


  • WARRANTY:We back this basic starter kit with 18 months warranty.If you meet any question, please contact us, we will fix your issue within 24 hours.               




  • Description:
    This is a Bluetooth 4.0 dual-mode module. Compatible with Bluetooth Smart (Bluetooth low energy) and Classic Bluetooth
    This also means that it can support both iphone and almost all of the android phone.
    Please note:
    When the module works in bluetooth 4.0 low energy mode. It only supports iphone4s or later.
    When the module works in the bluetooth classic spp mode, it only supports android phone.

    PINS:
    VCC: input power supply 3.3~6V, Prohibit more than 7V
    GND: Ground
    TX: transport
    RX: receive

    When working in bluetooth 4.0 BLE mode:
    Service UUID: FFE0
    Read Write Notify UUID: FFE1

    When working in Classic Bluetooth 2.0 SPP Slave Mode:
    It can replace HC-05 or HC-06 modules

    TEST APP:
    For iOS(iphone 4s or later/ ipad 2 or later): LightBlue (down from appstore)
    For Anroid : Bluetooth Serial Terminal or other Bluetooth Serial App( same as HC-05 or HC-06)


    Images:










    没有评论:

    发表评论